Hondata

Sorry guys

My ill English done some confusion here.
I meant to ask is when trying to tune the Part Throttle Fuel (Map), say fuel low table at cam angle is 30 degree, so at cam angle low table under VTC my preparation should fill up the table with value 30 and repeat the same procedure for fuel low ...

In the help portal of Hondata it was written as follows:

Preparation
• Open your calibration, and display the low speed cam fuel tables (F5).
• Find what cam angles your calibration uses - normally it will be 0, 10, 20, 30, 40 or 0, 15, 30, 40, 50 degrees.

Cam angles
Cam angles

• Starting with ...

Hello every one

I have compare both cal with the comparison tools provide in flashpro manager.
I have found the MAP WOT pressure determination between the two have four differences but in no where I could found any major differences besides one minor difference in one cell.
Is this table concurrent ...

Thank you Pepperdanky

Regards,

John

Hello all

I am new to Flashpro, my friend have currently acquire a 2008 model Euro FN2 Type R equipped with a Hondata Flashpro from previous owner.
However, we do not know where the previous owner get his tune. The car is consuming a lot of fuel, jerky at cold temp idling and short burst of power ...