Hondata

Thank you, I wound up going with this:
https://www.dieselperformance.com/shop/ ... erter-1022

I’ll update when I get it, but it seems very promising!

I’m wondering if it’s possible to wire the Garrett Turbo speed sensor output as an analog input that I can then datalog in the Hondata.

From the Garrett documentation the speed sensor will output a square-wave signal at 1/8 the input frequency(originally intended for 8-blade wheel). The input ...

One thing to mention as well, with the format you guys are sending it would be nearly impossible for them to do the conversion correctly because they would need to know what atmospheric pressure is before doing the conversion. I'm assuming you guys are grabbing this at startup, but the dash wouldn't ...

You misunderstand - when you mentioned the Motec, I did not know if it was using serial or CAN, as you did not specify, so I made a statement that covered both cases. In either case, the packet has a fixed conversion for MAP (mbar for serial and kpa x 10 for CAN), and there is no difference ...

We don't have a different output for Motec. It is the same serial packet, or if using CAN, the same CAN packets.


I don't know if that statement is correct, based of your packet format in the documentation the format is different:

CAN Protocol:
Screenshot 2017-07-12 18.39.48.png

You can see ...

Just wondering why the output for AIM is in mbar when you guys chose to output it in kPa for Motec? I'd imagine everyone would have the same problem converting mbar to PSI or kPa, might be worth considering changing the output format or at least giving an option to select what is output from the ...

Hmm, I thought it was more what you guys were transmitting to the dash? Based on your documentation it shows that the Hondata is sending the data in mbar, so I would think this has nothing to do with AIM.

It's connected using the RS232 output. According to your packet description in the Help section the output is mbar, I've attached the screenshot from that section.

Hey Guys,

I'm having some issues with the MAP sensor output to our MXL Pro dash. The output from my S300 is mbar, you can change the input type in the AIM software to PSI or KPA however I don't think the conversion is correct as I'm seeing boost values way higher then they are in my Hondata Datalog ...

Took the VSS signal wire directly to my jumper harness in a last ditch attempt and I'm still not seeing anything in SManager for speed. Not sure what else to check here :(

Seems like everything is good at the plug, checked for continuity to battery on the black wire which was good, constant battery voltage on the black and yellow wire, and I had some voltage at the blue/white wire (not sure what it's supposed to be since it's the signal wire). All of these were ...

It's a 1999 Honda Civic SiR

Hey guys, I'm kind of chasing my tail on this. I've been reading, searching and trying different things to get a proper VSS signal to my Hondata S300 v3. I've tried replacing the VSS with a fresh OEM one, checked wiring, checked continuity with multimeter etc ... All with the same result, no VSS ...