Hondata

i followed the steps..

result:
-datalogging was displaying or sensors were reading live in the display window.
-started the car, cranked and started for less than 1 sec then died.
-cranked it 2nd time, the same
-cranked it third time, it started, but a rough starting and it was idling
-at this ...

was having the same problem got a code for the multiplexer uploaded same map with an older version and all was well again

ahhh..great to hear

but in my case it still didn't work i tried a different map with an older version of kmanager same problem still existing. i didn't have any problem ...

i just dl the latest kmanager from the website. i upload the map and the car started for about 1 sec then died. then i cleared the security and reupload same happened. then upload map again and this time car started but idle at 1900rpm with af dead at 10. also the live display of sensor is not ...

just wondering..i thought hondata said that even tho you use 05 kpro with harness on the element or the accord. the cluster and climate control will not work. so did you fix this yourself? or just run it without those? i'm confuse now. if somehow the speedo and what not work, does this mean it will ...

i had the same problem..but i fixed it..just swith the af + and - around, not the heater control

carlettosan wrote:@cstyleaccord: could you share with us the updated progress on you accord/k-pro project?

Please supply an email or MSN contact. I am very interested in the harness you built.



Thanks, C.

email: dekhmerone@yahoo.com
AIM: dekhmerone
MSN: c_sieng@hotmail.com

Hondata wrote:What does Test USB say? Have you followed the help file troubleshooting and looked at the Device Manager?

the usb test was fine..it say my driver was up to date..

still happened...now my friend can't even rev past 4k

From the help menu run 'reinstall drivers' then 'test usb'.

i did that for about a million time..my dealer told me to use the 2.1.3 version or something bc he experienced the same problem. and i've been trying to download that version and i couldn't..if you can link me to download it i'll give it ...

ok my install didn't seems to want to help me..so here is my problem..at first i was having trouble uploading the calibration...but after i installed the latest version of kmanager and update teh usb drive i was able to upload the calib..but however i couldn't do any datalog nor display any reading ...

why exactly won't the stock gauges work? is it because the rsx ecu works on a different protocol than the accord and tsx?

rsx and accord has different wiring between the mulitplex system and MICS..rsx uses vss and accord use bunch of other sensor to control and determine the speed...but here is ...

just want to share this with hondata and everyone else..

setup: 2003 Accord sedan with rsx ecu kpro

i build a custom harness from scratch..it took me about 2 days spending about 1 to 2 hours each day..but anyway at the initial setup..i only hook up the basic wiring...at that point..the rpm, speedo ...

sup guys..please help me out on this one..here is the deal, i have an 03 accord, and right now we just finish building a custom harness to use the 02-04 rsx type s kpro ecu..and i've heard that i'm suppose to upload the 05 rsx calibration to get the speed odemeter read right due to the countershaft ...

maybe this could help you out a lil bit..

http://forums.clubrsx.com/showthread.ph ... auto+turbo

The RSX multiplexer is incompatiable with the CAN bus found in the accord.

can i possibly run both stock accord ecu and ep3 kpro ecu at the same time? just like aem does with their 1030 model. can i just wire it off from the harness to new connectors to just control the "vss" and the can system ...