Hondata

Yes I have, they originally said it's not covered under their warranty because it would have been a fault in externally wiring, but they are now potentially asking for me to send it in to test. I have not yet received confirmation on that as of yet.

Update.

Can't connect to either of the 2 s300 v3 in my ecu, and I can't connect to my s300 in the other ecu.

Car will start and idle with all 3 ecus (mine with my s300, other ecu with other s300 (and my calibration with oem mapsensor adjusted), and with the oem automatic ecu with the OEM map ...

Wouldn't let me edit the post, but I forgot to add that I pulled the ecu cover off the automatic ecu hondata and the hondata shows a solid green led by the serial and a rapidly flashing red led by the usb port labelled D2 I think.

Smanager comes up with an application error while connected to this ...

Well whatever ecu package they sent me was able to run my automatic b20vtec, so not sure what they did, or if they did anything.

I reseated the hondata chip as well and nothing changed. I still had the o2 heater code, even though it disabled in the tune. I read this by counting the flashing cel in ...

- serial number of the s300 inside the ECU: 54187
- version of software being used (Help, About): 2.7.6 build 2002
- what sort of vehicle you have: 99 acura integra obd2 conversion harness to obd1 at the ecu.
- what sort of ECU you are using: hamotorsports modified/socketed chipped "Hondata S300 V3 ...