Hondata

You should never backdate the software...EVER.

When the people have problems with the new version, i don't understand why they can't go back, my car runs now perfectly with the v3 version that comes with my Kpro, and i never go back for the v4 version, because i don't need it.

Or, Hondata is ...

Fixed in v4.1.5

For driving my car some months with the v4 version, version that have changed my car, for a bad way... it has started to burn up the catalist, and now its time to buy a new one... thanks for the fast response Hondata!!!

Next time hondata, is better to listen the users. You can ...

Solved the problem.

I have installed the Kmanager that comes in the cd with my Kpro, loaded the map, uploaded to the ECU, and it idles fine with or without A/C ON.

So, V4 software don't work with Kpro v3 hardware.

Thanks for your attention!!!

No, the problem continues...

This month it starts to run richer misture, from the tuned 13.2 to 12.3/12.8 at full throttle, and i have noticed a big drop in power, when i have checked the data log it is running between 21o to 25 degrees in ignition at full throttle too, without touching the ecu ...

yesterday i have done a trip and done 200km, with some stop and restarts.. the same problem, it doesn't change nothing.
When i insert Xenon lights, the car almost stop too, and when i use steer... it feels that iacv is moving slowly, i have raised the iacv duty cicle, but only have seen the idle ...

the ecu i bought and they installed at chip-tuning in switzerland, hondata dealer.

after a few changes, in low and idle ignition maps, correct the tps to 0%, in only does vibrations when insert air conditioning, but this is not normal.
After the new v4 software, and little change in 7000/7400 fuel ...

hello
Sorry for my error.
The voltage drops at 12.6 when a/c inserts, i have noticed one thing too... my tps sensor, reads now 1% at idle...
I have checked the full throttle, the voltage remais at 13.5/13.6

map and datalog

Hello
Today, after get the new software version update, and little adjustment in fuel at high rpm, and when i start A/C, the engine almost stop... i have checked the datalog and i have seen that when A/C inserts, the ignition advance arrive at 32 degrees! wowww!
I don't understand why this update ...