Hondata

so I jus thought I would post an update since the car runs now, I cleaned the IACV like hondata suggested and I changed the idle valve duty cycle slider in kpro (slid it to the right) reloaded my map and the car idles perfectly now, it doesn't bog down or anything even at higher rpms like before.
I ...

The MAP sensor is still not working. It could be wiring or the ECU.

really? i changed it with another stock one and the car has been idling now and thats the only thing ive changed.. and the idle valve slider in kpro
but when i try to move the car as soon im moving and try to stop again the ...

Since you do not have a wideband there are too many unknowns. Have you talked to your tuner about this or about getting a basemap?

There is no way to see oil pressure in the K-Pro software. You will need some other oil pressure gauge for that.


thanks again for the replies i will be getting a ...

The main problem is that your MAP sensor is not working.

Additional things to look at is the o2 sensor operation, VTC (oil pressure, debris?) and TPS.

It looks like you did overheat the engine (250F)

so i swapped out the MAP sensor i had and got the car started and idling, but i tried to do a ...

Thank you for the quick reply, I will get a new map sensor and I think I found the problem with over heating.. there was no overflow tank on my radiator. I will give and update once I replace the map sensor, and do another datalog. Thanks again

So let me start by syaing its a k24 frank with k24a2 block and z3 head swappedinto a 2005 em2
i initially had idling issues and found out the chain was strectched but since then i installed a brand new chanin and tensioner.
now when i start the car it wont idle unless i keep my foot on the throttle ...

thanks.

So when i finished my swap i tried the immobilizer bypass option.. i wired it with the harness and it worked fine.
but no i purchased Kpro yesterday and im wondering if i should remove the "bypass" and re-attach the wires on the harness and then plug Kpro in?

i searched for about an hour still cant ...

thanks for the help, cars been running great!

Hey Guys i have EM2 k SWAP, im getting a tune early spring but for now i jus need something to run. ive used a couple from kmanager but i feel like i can can get a base map closer to my setup than the ones in kmanager..from someone out there, thanks
looking to order a HR CAI very soon.

K20A2
TSX ...