Hondata

Will increasing these tables closer to 0, cos they're negative values. free up more power/hit closer to desired values on "tuned" tables like throttle torque,AirC%, ignition & PA#tables?

On the latest update 4.5.6.0 where did the amount of knock retard windows go? Or was it deleted?

Thanks heaps👌

As topic heading suggests, turbine mass flow? The factory unit has 79 g per second as it's settings. If I was to use a mhi2 and all the info on the Internet says it flows 33% more. Would I just put 105 g per second in that section of the program?

Thanks heaps👌

Is it possible for you guys to generate high pressure fuel pump passwords that we can just purchase online so that we can use any high pressure fuel pump of our choice?

All us 93 octane has 10%E at the pump unlike Europe & Australia's 98ron which is ethanol free.

Spunkster wrote: Fri Feb 24, 2023 11:36 am No, it will not fix a problem like this.

I just checked the pinouts on the p28 ecu I have negative to all 3 dizzy sensors and no positives does this mean the ecu is shot?

I checked the power supply to the 7 pin plug I have negative supply but no positive supply to the 3 sensors in the dizzy.

No cel codes. Just in sensor list the dist,error is on and no spark

Like the title suggests we'll CPR kit get around the bad distributor error? I've tried 3 different distributors And still have no spark I have checked all continuity between the between the 7 pin connector and 2 pin connector they are all fine

No complaints... there just seems to be an average of 19.5% discrepancy, most people ive spoken with the output at the wheels at the torque peak is higher than the actual demand.

For example 505nm(372 ftlbs) on the demand and reading 415 ftbls(562nm) at the wheels.

I guess the bosch model is ...

Throttle...

What do the torque tables actually affect? For example if i put 505nm(372 ft/lbs) at 100 throttle from 0 to 7krpm will that be the torque at the flywheel or at the wheels? Given all other tables can meet that demand?

That great.... I thought the max grams per second vs the max voltage was a fixed figure, so per the max voltage the gram per second can go higher. Thanks.