Hondata

Thanks a lot.

Hi. I have the Hondata interface cable but the setting in mutiplexer output will need to be changed from Aim MXL to Racepak. Is there anyway the Hondata can communicate with both?

Hello All,

I currently have a Kpro V4 in my Civic EP3 and I am using the RS232 signal to get information to the Aim MXL dash. I am about to rewire the car and I plan to use a Racepak Smartwire PDM. I would like to be able to connect the 230-VM-EFIHON so data can be sent from the Kpro to the ...

Help

Log 2

Log

Thanks for your response. Please see the requested files attached.

Hi Everyone,

I am having an issue with my EP3. I am running an AIM Pista digital dash and it connected to the Kpro using the RS232 connection. When I drive my car it starts to sputter and buck after a certain RPM. When I turn off the ignition and immediately turn it back on, there is a rev limit ...

Thanks. The calibration is below

The aim originally worked with it for a couple of months and after the problem I removed the converter but still no success. Can I run the aim from the RS232TX pin within the Ecu? Bypassing the converter or using the internal rs232tx pin is not working

Hi everyone,

I had an Aim MXL digital gauge installed in my car and it was connected to my V3 Hondata via the Aim board. I recently upgraded the Ecu to V4 and the Aim continued to work as normal even with the Aim-Hondata board still installed.

I was driving the car and there was an issue ...