Hondata

The car was fitted with stock injectors and stock map with the euro map and car never started then I done the return to stock option and car still did not start and after that I fitted the 1000cc injectors with stock map sensor and return to stock option on FP car started no problem. I am confused ...

Still did not start. Put back the id1000 in and stock map sensor and started up first time no problem.

changed the injectors and map sensor to stock. Put the stock Euro map on.
The car does no seem to start. Log is attached.

I will put the injectors and map back to stock tomorrow and then put the 1000cc ones back it in and try again?

Tried that but the car does not still start.

heres the map and data log

The map has been used on two other cars and working fine till this day.

My mapper is convinced that should not make a difference.

Can you possibly provide a base map to get the car started and idling so i can rule out if their is any mechanical fault.

The car atm has Hondata 4 bar map sensor and ID 1000cc injectors.

ECU part number is 37820-PCX-G16

UK 2009 S2000


The car starts fine when return to stock. If i put a stock equivalent map on it then car would start without CEL but if i edit injector size to 1000cc then car would not start ...

Hi,

Had a rotrex charger fitted two weeks ago and using a etuning service to map the car. The car ran great on base map and a few amended map later. Suddenly one day started the car and idled rough. Revved rough and sounded rough. CEL light came on got the following codes P2184, P0498, P0452 and ...