Hondata

no other saved copies. it was only on one laptop before it crashed. i guess a retune is in order.

s300-5907 / p72 ecu

ok, so i disabled the data logging and the same thing happened. I added more grounds, rechecked tps, map, coil, igniter, main relay, all fuses, timing, cap, rotor, wires, plugs. i changed the alternator. fuel pump is ok. took it for a test drive and at 5375 rpm it cuts off. looked at the logs and ...

no not yet. if i do disable it and the car runs fine is it the ecu thats the problem?

yes the mil was always on, even when tuning. checked it and no codes. even tried jumping the service port also and still no codes. should my laptop be pluged in charging when hooking up to the hondata? i uploaded the map at the strip so it was only running on battery.

I tried to do that a few times. still didnt change. i uploaded a stock map from the calibration list, closed smanager, turned off car. turned on car opened smanager, uploaded race map. car did the same thing. i had a problem before but i was using a 6 foot cable. after talking to hondata i used a 3 ...

the newest version. 2.2.7.0

Hilo, Hawaii
96 civic hatch
gsr turbo
67mm turbo
moran motorsports 1000cc injectors
sk2 cams and valvetrain
81mm block
rods and pistons
edelbrock im
obd1 jumper
hondata s300
hondata boost controller
using a regular usb cable with ferite beads at both ends looped in the beads


Car ran good last ...

car is a 96 ek gsr turbo. tuned the car last month with an old version of hondata (not sure which one but it did not have the tps ign table yet. car made 600hp and was running fine. had to fix my laptop and the uninstalled all my shit. so i re downloaded the new hondata 2.2.7 version and now the car ...