I don't know if it helps, but I just put the exhaust cam gear back to zero degrees, and it keep showing Error P0341 - Variable Valve Timing (VTC) Phase Gap.
I just checked to see if it was missing a tooth but the timing is ok. Can it be the cam position sensors not reading right ?? If I pull the ...
Search found 3 matches
- Sat Sep 07, 2013 3:20 pm
- Forum: K-Pro / KManager
- Topic: VCT intermittent
- Replies: 4
- Views: 2581
- Sat Sep 07, 2013 1:34 pm
- Forum: K-Pro / KManager
- Topic: VCT intermittent
- Replies: 4
- Views: 2581
Re: VCT intermittent
Sorry, I'll post everything.
- serial number of K-Pro 05008786
- ECU part number 37820-PND-A07 and serial number 2062-805014 0E26
- KManager version 3.2.5
- the calibration is attached
- I'm posting a datalog with the car stoped, but It's possible to see that the CamCMD shouldn't be at zero.
- It's ...
- serial number of K-Pro 05008786
- ECU part number 37820-PND-A07 and serial number 2062-805014 0E26
- KManager version 3.2.5
- the calibration is attached
- I'm posting a datalog with the car stoped, but It's possible to see that the CamCMD shouldn't be at zero.
- It's ...
- Sat Aug 31, 2013 5:47 pm
- Forum: K-Pro / KManager
- Topic: VCT intermittent
- Replies: 4
- Views: 2581
VCT intermittent
My car was working fine, but suddenly VTC started to stuck at 0 degrees, both CAMANGLE and CAMCMD, meaning that the ECU was going in to limp mode for some freaking reason. When this happen, Vtec also doesn't engage. I was at the Dynamometer today, and In some pulls VTC started to work, and if I turn ...