Hondata

Hi
Then 2.4.6 was released I enabled Full Trottle shift on our JDM FD2 and it works fine.
But after update until 2.4.8 this is doesnt work and rev limiter works on all gears at 6300rpms. (current setting in Full trottle shift rmp limit)
Is it possible to fix ?
Thanks.

Great!
Thanks a lot!
Is it possible fix the same issue on preverouse release tree 2.2.x and 2.3.x ?

Very big thanks for your help!

full datalog added

Hi,
I don't understand you logic. Where is cold-hot boundary? I don't see static ECT.
PLS download full datalog from this url http://disk.tom.ru/lcjyfzj . Such forum not allow upload a big files. This is new datalog on 2.4.2 beta version.
You can see morning warmup, full trottle run on cold ECT and ...

Hello Hondata.
My main problem is that the engine management system is not working properly. not because my enginue it is cold or hot. I work with a variety of other brands how AEM HALTECH APEXI etc and nowhere to similar problems are not met.
in this mode - I can not change anything that is ...

Hi
I added some parts from one big log. It's start from warmup and continue driving.
PLS see doublecheck problem log with high load.
The problem is absent when ECT warmup more then 80C
Very big thanks for attention.
Sash

PS Full datalog in one session avaliable here http://disk.tom.ru/2xymmqs

The way ECT compensation is used by the ECU is that the ECU only recalculates the compensation when the ECT changes by a degree or so. Both datalogs have constant ECTs for some reason.

sashg - why is your ECT constant over quite varied driving conditions? Can you make a datalog from a cold start ...

SN is 12955
FW 1.04
SW 2.3.7


This problem present on diff version of boards and sw versions.
BR!
Sash

Hi men,
I working more then 5 year with hondata's ecu. And all time the i see such problem I told my clients - PLS change thermostat. Of couse this is fix the problem....but not at all.
The main problem why then i have 4% in fuel compensation table we have 20% in log and very rich AFR?
During warm ...

Hi
I see a lot of times problem with uncorrect compensations on high load.
PLS see attached logs.
This is a big problem some time then you use low termostat for example.
another example : i have OEM thermostats which is open at 77.8C and at the same time see VERY BIG correction at ETC.c not from my ...

30-4100

Hi Hondata,
We have K-Pro v3 serial number 10013.
Is it possible to use digital input with aem uego?
I was connect serial output into hondata but don't see any data on digital input at all.
BR!
Sash

the problem was solved!
Then we are using stock map scheme - hondata update maps sensor always.
Then we are using Replacement Map sensor scheme - map sernsor voltage updates then engine is canking or runining.
BR!
Sash

Hi Hondata,
I have a trouble with MAP sensor.
I was checked 3 different map sensos ( stock,AEM,denso).
Then i checked "stock MAP sensor" with connected stock sensor - always works fine. engine works without any problem. Voltage is correct for stock sensor and for another sensors.
But then I checked ...