Hondata

thats correct the s300 was swapped into a different p28 and its flawless

can these displays be integrated and the display on the rd1?????

so my car tuned out great, and had no issues what so ever. i hit the track and start to data log and its falling on its face. is there an issue with the onboard data log enabled,and me using my laptop to log at the same time?????

its like all the sudden the ecu freezes everything in the values they ...

b16a2/84.5/e85/6766/id2000/s300 with cpr and s2000 coils

well after a few weeks of tracking down issues we were down to the last option and it was the ECU the entire time.replaced it with a known good one and bammm power

and that you didnt buy a cheap dizzy from ebay like i did lol this will save down time and money

this is mine man

https://www.facebook.com/photo.php?fbid ... =1&theater

no problem this is how we can learn to diagnose things without having to pay someone to do it for us

ok my problem is solved it was the dizzy. it seemes the dizzy keyway wasnt ligning up correctly with the cam causing the shaft to move affecting the pick wich was throwing the sensor off.

new dizzy, and good to go

i bought the rywire adapter plate that allows the use of the k series or the s2000 coils so I should be fine there.

was the d17 coils an issue you think

after further research i found out that i had d17 coils, and am hoping this was my issue.

will the s2000 coils work with this system

i have one more thing to try my coils might not be seating all the way down against the plug causing spark jump and grounding out on the valve cover. this may not be an issue at lower rpms, but when in the higher rpm and more spark i could see it.

i need to try the coils down to being round so they ...

yah its just wild when it starst it idels fine with no issues, and runs well untill 7000rpm then it just falls everytimeim trying new coils and dizz if the same issue then ill go straight dizzy.

Thanx

this i didnt try we just took my car to the hondata system over the aem, and everything was setup for the cpr so i couldnt tell you if it does or not on a dizzy only.

and i have to travel 160 miles to my tuner one way.

let me ask you this my dizzy i bought new, and probly isnt an oem one since i ...

yes he took the brand new rywire harness and the cpr harness and soldered the cpr into the rywire harness.

no t-taps were used

the tdc code is what we are more confused on than anything else along with the backfire while just trying to start the car. the tuner said its like its not trying to fire ...