Hondata

Here, I'll find the map.

Thanks.

Hi,

I want to use the Aux 1 output for radiator fan control.

Output : A20 PCS

I put some conditions for the activation (Function : Generic output) :
Engine speed : min - 800RPM / Max : 9517RPM
Engine load : min - 100mbar / 17520mbar
Throttle : 0%
Vehicule speed : Min - 0 / Max : 158mph
Air ...

I never said that Smanager have a bug... I just asked a question. Thanks for the answer.

Rom.

I verified the wiring loom, I haven't find any problems compared to the electrical scheme... I can't have an other vehicule to test the ecu.
Is that possible that you made for me a Smanager version with the possibility to disable the number 8 error code? (I'll pay for it).

Thanks.

Hi,

- S300 V2 => 20149 (ECU is a P30 EUDM)
- Smanager 2.1.5
- Error code (8 => TDC sensor)
- Car : proto vehicule with a B16A2

I have a problem. When I switch ON the ECU, the error code (Top dead center) appear. I start up the engine and clear ECU error code, the error code 8, disappear and never ...

Rectangular.

Hi!

I tested the Beta version (2.2.4) with the wiring loom on a test table (osciloscop, alimentation +12V,...).
I have got some problems too, here I will explain my test.

The test had been done with datalog active ( yellow thunder) and tried with two different laptop

1 - I introduced a ...

Thanks I will try it today, I hope my problem will be solve.

Hi!

I have a problem with a S300.
- S300 V2 => 20149 (ECU is a P30)
- Smanager 2.1.5
- No error code (just code 8 TDC Sensor, but disapear when the engine start up).
- Car : proto vehicule with a B16A2 (stock injectors with 60Psi fuel pressure)


Problem description :

I think I have a problem with ...