Hondata

Ok it works now, the issue was the Minimum cam angle being at 0.. I put it at -30, now it works. You said minimum throttle, but you must have meant this...

Tried that, no dice. I hooked the wideband back up to the eld wire, and thats not working either... so Im thinking something is definitely wrong on the software end, I notice a couple other people recently started threads having the same issue.

I have old kmanager versions V3-2-5 and V4-4-6, can I ...

Ok I tried that, no difference, no overlay.

Heres some driving. Still cant get overlay to work, and I updated to the latest 4.6.1

Serial#: 40264

Hello,

Kpro4 here in a 2000 Honda S2000

2 separate issues (1st one fixed via workaround):

1.
I have installed an APSX D1 Wideband connected to the Analog Pin 0. I initially configured it as a "Custom" conversion and put the voltage/values in there.. 0v=9AFR, 5v=19AFR. This worked for like 10 min ...

Spunkster wrote:Try it without the VTEC oil pressure disabled.

Just tried that.. cel came on for vtec oil pressure. Still no A/C

This is what I got on there, unmodified 00-03 AP1 basemap...

Forgot to add that Im using the latest K-Manager V3.1.2, and I've reinstalled the software and re-loaded the ecu a couple times to no avail.

Hi, having some difficulty with my A/C.. everything worked just fine before Kpro ecu install.

Condenser Fan and Compressor Clutch are not turning on. Pressure switch works. Ive concluded that ECU pin A17 is not grounding the clutch relay when the a/c dash switch is pressed, because if I ground the ...