Hondata

no, i have stock gsr cams in a b16 on low compression cp pistons rated at 9:1. Running an aem uego that's reading fine under WOT but at idle and cruise im getting super lean reading of 18+ and a rough idle which i initially though was due to the lean idle. or maybe the rough idle is whats causing my ...

And these are the ignition tables if that helps

oops, I think that was from a datalog. Here are the low/high speed fuel tables from the tune. I'm getting a rough idle and super lean reading (17.2-8) and am told the fuel table may be the reason for it. Does anything look out of the ordinary out of these two?

notice the low numbers on the 1st ...

Hi, should the lines on my low speed fuel table be overlapping at any point? Here's a pic of my table

Can anybody diagnose the problem I have if it's from my calibration? I'm getting a very rough idle at startup and RPM's drop down 3-4 hundred after reaching operating temp. When holding rev at 1.5k it'll drop down to .5k then jump back up and so on. I'm also getting a lean reading at idle too lean ...

thank you very much!

Is it normal for the PWM to drop to 0% duty between shifts? I'm thinking yes because it makes sense because it wouldn't need to control boost when the throttle plate is closed but then again I'm no tuner and don't know exactly how that graph should look. Any input?

Hi, I acquired a tune from the previous owner of my car and have almost exactly the same setup as he had it. If someone can help me with this and see if something is wrong with my setup or the tune I'd greatly appreciate it. I can provide the calibrations, pump gas and race gas, and the specs off my ...