Hondata

where can I get an older version from around early 2015

ive spoken with the remapper today.they say the issue is over fueling when I lift off.probably caused by such and old kpro map vs the latest update.
and the file being crupted.any way of rolloing back the versions so I can load the old map to the ecu?

thanks for your reply
please can I ask if you looked at the calibration and datalog?as your reply sounds like you didn't

as for running 2 ecu's.i agree isn't not a good idea.but its been on this set up for a number of years now with no problems

please can you have a look at the files and tell me ...

So a few days ago i had a spoon sports 5.3final drive fitted in my cl7 euro r that is supercharged.it uses a second ecu for running the engine.its a dc5 ecu with kpro one.drove the car for a few days with no issue,but i noticed my speedo was way out.so in kpro i changed the final drive to 5.330 and ...

yep i found my throttle cable slack to...when datalogging and looking at tps sensor.i tightened cable up to show 1% and then slackened it off a very small amount..been perfect ever since

hello again...my tps seems to be working ok...but im finding that when i push the throttle pedal about 1mm my car is very jerky to drive..its like at 1 mm throttle the tb is opening and closing...

any idea's to get the throttle smooth?

what difference will it make being 0 not 4.5?

i thought when the min and max setting where found.kpro would scale the difference between the two numbers

i will have another look..just a pain in the bum as my laptop is so old.battrey only lasts 5 min.lol

thanks

i thought i had.when i fiited it.the sensor was full counter clock wise.and was reading 12.so i went full clock wise and got the 4.5 reading....

do you think i will get closer to 0 with the sensor in the middle?

thanks for your help you are a legend..

my tps min is now
min 4.5
max 96

is this ok?

4.5 was the lowest i could get it

thank you very much.i will try this when i get home on monday.

just to confirm can all this be done with the engine off?

thanks you very much again

yes i have thanks..but the "read" buttons on the scale tps min,max ..dont work.they cant be clicked.

please can you explain.step by step...ive only had kpro a week.and still working out how to use it...

do you mean i have to do a datalog with new tps fitted.then bring up datalog and calibrations together?how do i do that?

then click read min,max.save and send back to the ecu?

thanks,im very ...

hi
ive fitted my new tps.but kpro will not alow me to change the tps settings.
it will not even let me read the values...it wont let me click read min or max.please help

did you fix this problem?

ok thanks.

at the moment
min is -0.1
max 101.9

is this the angle of the tps.or did the tuner put these numbers in to kpro ?

thanks