Search found 7 matches

by 95c1v1cs1
Sat Sep 03, 2005 10:26 am
Forum: s300 / SManager
Topic: Strat up problems with S300 after converting from S200.
Replies: 16
Views: 12998

When I first start the car it idles different and then after about 10 sec's I see changes in the way it runs.

I did play with the post start fuel adjustment and it helped a bit. I put that number to 0.

I am running 1600cc injectors so I figured that what was giving me the problem.

I'm ...
by 95c1v1cs1
Sat Sep 03, 2005 10:21 am
Forum: s300 / SManager
Topic: Extended RPM
Replies: 2
Views: 3808

Thanks, I changed the numbers but was not able to have extended rows. Is that the correct way to do it?

Thanks,
Corey
by 95c1v1cs1
Thu Sep 01, 2005 9:44 am
Forum: s300 / SManager
Topic: Extended RPM
Replies: 2
Views: 3808

Extended RPM

Can't seem to find where I can get the extended rpms onto the map.

Can anyone point me in the correct direction.

Thanks,
Corey
by 95c1v1cs1
Fri Apr 02, 2004 11:09 am
Forum: s100/s200
Topic: Car shuts off after pulls
Replies: 1
Views: 1506

what does the idle control do if you increase it or decrease it?

Thanks
by 95c1v1cs1
Wed Mar 31, 2004 7:50 am
Forum: s100/s200
Topic: Car shuts off after pulls
Replies: 1
Views: 1506

Car shuts off after pulls

The car idles fine sitting at ~14.7 A/F ratio. After driving it hard the car just wants to turn off only sometimes. I just curious if anyone could help me figure this problem out. Fuel, ignition, idle setting??? I don't have access to the rom at this time, but any help would be appreciated.

Thanks
by 95c1v1cs1
Tue Feb 24, 2004 2:27 pm
Forum: s100/s200
Topic: fjo and 4b
Replies: 4
Views: 3003

I just got off the phone with FJO.

There is a Square 4 wire plug connected to the FJO controller. There should be some Lettering on these connectors listed A,B,C,D. The colors coming out of the controller into the 4 wire plug are as follows(some of the FJO units have different wire colors so make ...
by 95c1v1cs1
Tue Feb 24, 2004 12:19 pm
Forum: s100/s200
Topic: fjo and 4b
Replies: 4
Views: 3003

To add to this, which wires are the gound and signal on the FJO Wideband unit?

There is: A Blue wire with a plug
A Green wire with a plug
and then a 4 wire plug with green, red, Blk, and White.

Thanks,
Corey