Hondata

yes sorry i meant socketing, the reason i ask is because i had Hondata socket the ECU for me back in 2012. Wonder why this capacitor would have blown so quickly if it was replaced.

When did hondata start replacing C14 when dickering ecus?

Today my ecu decided to burn up, one of the capacitors leaked and burned the ecu near connector A.

Should I send my s300 in for evaluation before using it on a new ecu?

Thanks

Right now i have precision 1000cc injectors, if i change to a different brand but the same size injector would i need a retune? also if i just replaced the injectors with the same exact ones would a retune be recommended?

Thanks

i cant seem to make a post and attach a datalog file, when it hits 100% the page does nothing and goes blank. ive tried different browsers, any one having this problem?

ok so i found the issue with the wiring and have the solenoid firing with the "test outputs" window. Looking at my boost setup it looks like its set to 1% which would be the least amount of boost? is there anyway i can see what amount of boost i was hitting running off the wastegate and what ...

P28 and it does have all the boost components installed, ecu was socketed by hondata. I'll have to check my wiring.

I dont think my boost control is working properly. I have tried to use the output test window and i do not hear my solenoid click at all. Im new to smanager and reading the data logs, can someone tell me how much boost im getting?

Thanks in advance

That's exactly what it was, tps plug is cracked and wiggled loose. I think I have a bad connection at the map sensor to, I'm going to get a new connector and see what that does.

Thanks!

The car was running great the other day, pulled it out this evening and noticed that the rpms would drop when they would hit 2000-3000 rpm. I have attached a datalog of the car sitting with me giving it some gas, not sure if this is enough for anyone to see what the problem might be.

Thanks

htownhatch wrote:

Spunkster wrote:From Help, About, what version of software are you using?

1.6.0.0

i downloaded the newest version, registered the s300 and its works, thanks for the quick response

Spunkster wrote:From Help, About, what version of software are you using?

1.6.0.0

ive got a new s300 installed by hondata serial 20312, hondata did the socketing and installation. ECU will not take a upload. please help. Thanks

I'm looking to get my car started. I just got my s300 installed and need a base map. I've got a b16a with fully built head, eagle rods and weisco pistons. CTR cams, edelbrock intake mani, skunk2 70mm tb... I've got 1000cc injectors( with resistor box), 3 bar map sensor on 93 octane Not sure what ...

Is it absolutely necessary to run the vacuum line from the top of the waste gate when using the Hondata boost solenoid? I have no room to hook up a line there.