Hondata

I've tested with 1.3.2 and it works as I would expect.

The 'Use MAP to determine WOT' selects whether to use MAP or TPS to determine WOT. Both tables are used elsewhere, but the main function is to switch out of closed loop. Be aware that there can be other factors in effect too - for instance, a ...

I spent a couple hours yesterday trying to figure out how the WOT Determination behavior is different when the "Use MAP to determine WOT" box is un-checked, and wound up pretty frustrated. First, there is definitely a bug in the Live Tuning for those tables (1.1.9.6 - S2000). I have always left the ...

I'm curious about the purpose of the LAF Voltage to Lambda table. Does that allow the user to adjust the OEM AF sensor so that it is correct, which would eliminate the need for the AF Corr value? If so, do you have any plans to enable this feature for the S2000?

Here's a sample of 2 datalogs that were recorded simultaneoously from my FP and also FPM.

I guess mine could be broken, since I know that I do have some corrupted flash memory chips (I need to send it in for repair). However, it is a valuable feature.

Well, I wouldn't have thought that it would do it simulteniously, but mine does it. I've datalogged many times that way. I can upload some samples if you like.

I will consider that, but that doesn't answer my question about why some FlashPro's can do it, and others can't, even while using the same laptop, FPM, and firmware. Is it a hardware difference?

As a software developer, I don't like using beta software.

I am able to datalog using my FlashPro while simultaneously monitoring and / or datalogging on my laptop. This is really helpfull for capturing high resolution datalogs while also seeing what's going on. However, I tuned another S2000 last weekend, and that FlashPro wouldn't allow me to datalog on ...

The throttle plate may not be quick enough to soften the initial bounce off the rev limiter, but it seems like it would be quick enough to soften the bounces after that. For example, if you're in 2nd gear at an autocross, and don't have enough straight left to justify an up-shift to 3rd, then it ...

Could you expond on what you mean by "currently supports"? I understand that FlashPro Manager wouldn't display the data correctly, but it seems like I could get around that pretty easily by exporting the datalog to Excel, then write a formula to convert the data.

Is there more to it that that ...

I have 3 PLX sensors (oil pressure, oil temperature, and EGT), and I would like to be able to datalog them with my FlashPro. Is there any reason why I couldn't use the ELD and ECT2 inputs? Can FlashPro Manager be set to display the raw input levels instead of Lambda, or better yet, allow me to ...

I'll try. If I had to guess which table it's related to, it would be VTEC Window Pressure.

I get that, but what about when you actually ARE live tuning? Is it documented anywhere in the help file that you should get the engine up to normal operating temperature BEFORE enabling Live Tuning?

I have uploaded a new calibration with Live Tuning turned off, and VTEC seems fine again. However ...

No, I don't do live tuning every day. If there's a reason why I should disable live tuning when not actually doing any tuning, then I'll do that. However, there are also times when I do hookup the laptop to do some live tuning when the engine is cold, and those times still require me to power cycle ...

I have all tables selected for live tuning, with 90% memory used.