Hondata

seen4ever

Spunkster wrote:sounds more like a problem with your clutch switch.

yet, if it was the switch, wouldn't it go to my defined WOT shift point of 8500, where my rev limitor is at 9800rpms. I couldn't rev at any rpm, 3000, 4000. nothing.

seen4ever

I'm confused, are you using RE4 or RE3?

Are you using the clutch switch input on the interface box? If so you cannot do that with RE4.

I've used both, the latest file is with RE3, due to this problem occurring in RE4 without the clutch switch.

Basicly, I moved to RE4 when released, had issues ...

seen4ever

I had a similar problem, did you turn off the clutch switch on both the 3 step and full throttle.. once I did that it stopped kicking in..It never happened to me until the last update..anyway maybe this helps :?:

yep, clutch switch was disabled in rom4 software completely. Just had launch rpm ...

seen4ever

it won't let me post the datalog as its in .rec since its rom3 datalog i guess. want me to post a jpg image?

I'm not wondering if maybe it could be a bad blue box or a bad ecu or something. just doesn't make sense. The car is 100% perfect on the street, but get to the track and launch the car and ...

seen4ever

Spunkster wrote:post cal and datalog showing the problem

seen4ever

this problem is back again. I recreated all 8 maps from scratch to create my new map. Yesterday on my way to the track, it started to act up. I tried two passes at the track and rev limitor would just hold. I don't use the clutch switch anymore.

Anyway to get rid of this bug, or should I move back ...

seen4ever

Don't use the s200 clutch switch input. Use one of the ecu inputs. This is a known issue.

hrmm, so I could just use the mph for launch limitor and then hard wire the clutch switch into the ecu off some pin, well other than the ones I currently use for the nitrous input and output.

thanks, this ...

seen4ever

you guys should update the forum logic to allow posting of re4 files :)

seen4ever

sorry it took me so long my email filter must be acting up.

here's the calibration.

seen4ever

Yesterday while at the track, I had 3 episodes where, I'd shift gears and the rev limitor would just kick in with nothing I could do to disengage it. After a few seconds, it would finally disengage and I could drive again.

I have attached a datalog of a 1/8th mile pull where you can see 1st and 2nd ...

seen4ever

6. If you load a earlier version of a Romeditor 4 BIN, you will have to save it as a RE4 file, then save it as a bin to update it so it can be reburned.

Due to the unfortunate passing of a local performance shop owner, I am currently unable to access hondata tuning resources. I took it upon ...

seen4ever

Spunkster wrote:6. If you load a earlier version of a Romeditor 4 BIN, you will have to save it as a RE4 file, then save it as a bin to update it so it can be reburned.

ahhhhhhhhhh, I think that explains all of my problems.

thank you sir

seen4ever

92 honda civic
p28 ecu with s200
ERL superdeck II
FR topmount
GT3567r
direct port nitrous
4in exhaust to 4in exhaust
1000cc injectors, external bosch 044 pump
supertech valvetrain

you name it, the car has it.

I thought mechanical as well, but as I said, i put in my old non rom4 file and it fires ...

seen4ever

short and simple story,

I was at the track running the car, after updating my 2step, the car turned off. This was related to the MSD distributor failing. Upon fixing the MSD distributor, the car would no longer start on the first turn over. It takes 6-7 attempts, where the car attempts to fire up ...

seen4ever

kaj wrote:but the car ran so bad i almost pulled the turbo kit.

your car needs more tuning, that calibration doesnt' remind me of a boosted car's fuel curve. looks like you need alot more adjusting on the timing and a/f areas, along with the configuration of other options.

Hondata

Search found 31 matches

Strange problem with Rev Limiter Kicking in

Re: Important info for those tuned with or using Romeditor 4

Re: Important info for those tuned with or using Romeditor 4

Rom V4 problem for start up, not present with Romv3