Hondata

Why would you not tune it?

OK, so kinda new here. this is the mods I have on my current set up
gsr bottom end:
ls crank
eagle ls rods
81.50 pr3 pistons
Race balance on whole rotating assembly
stock 3 layer head gasket

B16a2 head:
blox springs and ti retainers
Blox type C cams
stock valves, new valve guides
itr Intake
omni 68 ...

firsttunewithcams051913.skl 3rdgearpull.s3d Here is my set up:


OK, so kinda new here. this is the mods I have on my current set up
gsr bottom end:
ls crank
eagle ls rods
81.50 pr3 pistons
Race balance on whole rotating assembly
stock 3 layer head gasket

B16a2 head:
blox springs and ti retainers ...

Sorry about that. Here you go. Let me know if this looks right.

Yea need to upgrade injectors and fuel pump according to you datalog you maxing them out at 5800 rpm. So you have another 3k to go. Upgrade and get it tuned.

3rd gear pull.s3d

I was told at machine shop I would be at 11:6:1
So up grade fuel pump and injectors. so prob rdx injectors will do? I ...

firsttunewithcams051913.skl 3rdgearpull.s3d Here is my set up:


OK, so kinda new here. this is the mods I have on my current set up
gsr bottom end:
ls crank
eagle ls rods
81.50 pr3 pistons
Race balance on whole rotating assembly
stock 3 layer head gasket

B16a2 head:
blox springs and ti retainers ...

so I have added my logworks3 from my MTX-l wideband software, since I cant get it to work on hondata, a 3rd gear pull
so I have attached the hondata skl and the logworks datalog to see if I can get some help on this base tune.

If you have drop box, here is everything for my 3rd gear pull ...

ok, so got my blox type c cams and it idles real good, but it bogs bad when I hit vtec.

OK, so kinda new here. this is the mods I have on my current set up
gsr bottom end:
ls crank
eagle ls rods
81.50 pr3 pistons
Race balance on whole rotating assembly
stock 3 layer head gasket

B16a2 head:
blox springs and ti retainers
stock valves, new valve guides
itr Intake
omni 68 mm tb
stock ...

I just wanted to upload this and see if anybody can help fine tune it or give some suggestions. Please let me know, also my aem and a/f on s300 is off a little bit.
engine specs:
b16a2 head
itr intake
68mm tb
it springs and retainers
gsr cams
b18a1 bottom end
dc headers
gready evo 2 exhaust
pretty ...

What would be nice is to have a video with tunning tips, all I have seen is tunning with s200 write ups, i just want to tune my car, so why keep it all to your self, I dont want to take my car and spend tons of money, and if I blow my engine it will be me, not some place that will charge alot of ...

Seems like nobody likes to help us ls/vtec guys out..the only bad thing I have to say about Hondata is they dont have like a video to help tune, I have built me car and I take it to no one, why cant they help with tunes..a video would be nice..

Ok so I have had s300 for awhile and have played around with it, here are my engine specs
b16a2 head with gsr cams
itr springs/retainers
itr intake
68 mm tb
stock fuel rail and injectors
b18a1 bottom end stock
dc headers
gready evo2 exhaust
did a data log and trying to tune, I have tried p30 map ...