Hondata

I have already done all that. I even put the stock TB on and it works for about 5 minutes and throws a code. The BBK will not even work for 20 seconds. I have verifed all wires and even ran new ones. No luck. How about this for a new problem. My o2s are reading 3.7v. What is up with that? We thought ...

Back to the subject no one has a clue about. We ran new wires from the ecu and installed a known good tps. Problem solved. We figured that the wires were shorting out and frying the tps sensors. So everything is good! For a while. It never showed a code last night, or tonight, for about 100 miles of ...

Hasn't anyone seen this before? Is there a way to test my tps wires to see if there is possibly a short somewhere? I am lost. We have even replaced the engine harness. This is totally ridiculous. We have swapped ecus, hondata boxes, everything. Whats the deal?

Using hondalogger, with all codes cleared, tps works for 20 seconds and then throw a code and sits a 1.5v 26% throttle. We thought it was the sensor, but replaced with known good and still has problem. Voltage wire is good, signal wire is good, and ground wire is good. We are stumped. Also, o2s are ...

Every now and then I lose connectivity, and the light on the hondata doesnt even come on. I can usually fix it by cutting the car off and then back on, but sometimes even then the light will just flash. I have seen this on multiple ecus with multiple hondata boxes. Is there a known issue, or what ...

Very wierd. Car was B16a with fmu, went to b18c1 with hondata. Using a vortech fmu and intank fuel pump. Car started initially and ran fine. Still in break-in period so we didnt get on it too hard. Part throttle was amazingly perfect for first test drive. Came back, changed oil, set timing to 16 ...

Not to be a smartass, but that is kind of obvious that if it works with stock, then it will work with hondata. Maybe I should rephrase. Does anyone know if an MSD 7AL2 will work with the stock honda ecu? Does anyone have a recommended way to tell me how to find out? Any wiring instructions? Thanks!

I have an MSD 7AL2 and wanted to make sure it will work with the hondata. I was running a FAST system and decided to try a hondata instead. Anyone know if the 7AL2 is compatible, or do I need a Digital6 or similar?