Hondata

Hehe, i was waiting for this suggestions!
The reason i havent is because the connectors on the old harness were cut away by my tuner... so its not the easiest thing to fix.

But i have ohmed the tps connector to earth. And the connectors and connectiom looks good.

I have also replaced the tps ...

Hi,

I have a problem i can't figure out of.
I have a Civic Ej2 95 with a B20vtec with a newly mounted Rywire engine harness.

After installing the harness im having problem with the TPS sensor signal cutting when starting up the engine.

Im having the tps signal showing on the Smanager display 0 ...

Problem resolved. Rescaled the load axis and fully tuned on the dyno today.
i know this is a old thread, but how do you really rescale the load axis? :)

Thanks anyone! for answer
im struggling with a bad idle on my b20vtec with 2009 Hayabusa ITB's
goes from 800rpm-3200 continually. and is going ...

Options, Show boost tables, then go to http://www.hondata.com/help/smanager/changingtableindexvalues.htm?zoom_highlightsub=insert+column to see how to edit the indexes.

well, i just found out how i got all the way to 100%, by clicking "OPTIONS", "Show 3bar tables"

but i couldn't find out how i ...

Hey guys, im tuning my ITB's on my b20vtec, and kinda new to the hondata,
and was wondering how do i add a new collumn in the fuel / ignition tables? its pretty frustrating, because i want to get the hole scale on the TPS overview.

like on this table:
http://www.hondata.com/help/smanager/itb-dyno ...

crucian wrote:http://www.hondata.com/forum/viewtopic.php?f=19&t=3772

good enough?
i don't know if there is too much to datalog about it?

hello guys!

i have been building a b20vtec which i was thinking about using hondata s300 to tune with.
i did have a p30g which i soldered in my s300 in. and had a result of getting a solid cel.
i get to connect the s300 into the computer, and upload and download the maps without any problems, i am ...

hey, first time in here!

Tried to connect my newly soldered s300' p30g ecu in my civic today, and couldn't get my computer to connect the s300 through smanager.
tried with FTDI drivers, and device manager in windows.

later i read that when i get a Solid CEL. which i got. it usually is caused of a ...